• Increases wheel clearance.
• Improves stability.
• Light weight
• Exclusive urethane
  compound with titanium.
  
   

Two models of spacers are available...

GRAPH-LITE EZ Fit - The finest wheel spacers available. These spacers are an exclusive compound of urethane and titanium. The mounting hardware attaches to the existing press-in studs, providing a well supported foundation for the spacer. Available in 1.5" and 2.5" for most models, these spacers will provide both wheel clearance and a more stable ride. NOTE: Graph-lite "EZ Fit" spacers do not require stud removal for installation. These must be used when access to the inside of the hub is limited. Use for superior fit and assembly.

CLICK HERE to read IMPORTANT installation instructions for all EZ fit spacers

GRAPH-LITE GL - This series spacer is the same material as the EZ Fit. The difference lies in the mounting procedure. These spacers require the removal of the press-in studs. Long hex bolts insert through the holes, spacers and wheels. In order to tighten, the head of the bolt must be accessed. These spacers will not work where the head of the bolt is hidden, such as some four wheel drive models. You must use the EZ Fit for these machines. NOTE: Graph-lite "GL" spacers require that the studs be removed from the hub for installation and long "through bolts" (supplied) inserted in the stud hole.

If you're using DuraBlue wheel hubs, you need to use the EZ fit style of wheel spacer.

CLICK HERE to read IMPORTANT installation instructions for all spacers

CLICK HERE to read What you need to know about DuraBlue's wheel spacers for UTVs